How To Installing Printer & Scanner Driver for Brother DCP-120C

How To Installing PrinterHow to Install

If you don’t know which for the version of Windows 7 you are use (32 bit and 64 bit), please check by following the steps below:

  • Click Start => Control Panel => System and Security => System, and then check the System type.
  • The instructions may vary depending on the Windows 7 latest version.
  • Remove the “CD-ROM” before start working the installation procedure.
  • You must be logging on as an “Admin“.
  • If the User Account Control dialog box appears, and click Continue.
  • If the Windows Security dialog box appears, check Always trust software from “Brother Industries, ltd.”. and click Install.

Follow these steps:

  1. Disconnect your Brother machine from your computer if you already connected an interface your cables.
  2. Make a temporary folder or directory on your HDD [hard disk drive] as the location to save the downloaded self-extracting file, e.g. C:\brodnt.
  3. Download the file to the temporary folder or directory.
  4. Once the download is complete, open the folder directory and double clicks on the download files to extract it.
  5. Double click in “DPInst.exe” in the folder created in Step 4. Please note there aren’t any install screens or dialogue boxes after double clicking. Go to Step 6.
  6. Connect the Brother machine to your computer.
  7. You need to make sure if the installation of Brother original drivers is complete.
    Follow the instructions in the PDF file.

If you do it right, you can take a look at

This is the step to install the driver for the scanner